Highway Rescue Vehicle 13tons Wrecker Truck 4x2

Our Wreckers are welcomed in Asia, Africa, the United States, Europe and many other countries and regions.

Based on the technology from Miller and AATAC in America and TRUK in Britain, we designed and produced CV5180TQZKT..

Specifications:

Wrecker Model		ST5180TQZKT
Chassis Model		ZZ5161M6211W
Outline Dimension(L×W×H)		9640×2496×3080mm
Wheelbase mm		6200
Tire No.		6+1
Tire Style		11.00-20
Approach Angle/Departure Angle		22°/20°
Front Overhang/Rear Overhang mm		1465/1720
Total Mass kg		17515
Reorganize and outfit quality kg		12820
Boom	Max. Lifting Mass kg	13000
	Extension Stroke mm	2000
	Max. Lifting Height mm	5600
	Max. Inclination Angle	42°
Underlift	Original Lifting Mass kg	8000
	Max. Lifting Mass kg	5400
	Rating Lifting Mass Fully Extended kg	3500
	Max. Effective Length mm	2630
	Extension Stroke mm	1360
	Range of Obliquity Angle°	-6～90
	Folding Angle °	96
Outriggers	Transverse Span of Rear Outriggers mm	1440
Rating Towing Mass kg		17000
Rating Pulling Force KN		2×80
Length of Cable Rope m		40
Attention: The chassis with the similar specifications are available to choose. But the specifications of the wrecker are based on the condition of chassis.

Specification Of Liftingl

Range（m）	Rating Lifting Mass(Kg)
2.365	5400
2.50	5000
3.00	4350
3.50	3870
3.72	3500

Attention:

1.Range means the distance between the point of lifting and the center of rear axis

2. Lifting mass means the mass on the lifting point

The structure and function:

The carrier is fully hydraulic, and the power gets from the engine of chassis. It receives its power by the Power Take-Off (PTO)/ Pump combination attached to the truck transmission. The high pressure oil from pump flows through controlling valves and safe valves into the function components. Each function can be controlled from the Control Stations located in rear compartments of the body and the Control Handles are clearly marked as to their functions and directions.

The Function of Every Part

（a）The sub-frame is the basis to install the uploading parts. Owing to the sub-frame, the force gathered from all parts is balanced burden by the chassis, which can improve the pressure condition.

（b）Under lift is the key part when making rescue effort, through which it can lift and tow the failure vehicle. it can fold, lift, tilt and extend/retract to achieve every rescue work.

（c）Outriggers are installed at the rear of the wrecker. The main function is to improve the stability of wrecker and avoid overloading of tires when the wrecker lifts and pulls damaged vehicles.

（d）Toolboxes are located at right side and left side of wrecker body, which are used for store parts and accessories. Control handles are installed in rear toolboxes of wrecker body.

（e）Boom assembly, which is installed on the sub-frame, is for lifting damaged vehicles.

（f）Flyer is the support to light bar. The light bar is over it and the low level light bars can warn people and vehicles, also the flyer makes a protection to the cab from rear crash.

(g)The accessories are the tools to help the wrecker finish rescue work. They deal with many kinds of vehicles in different methods.

Contact us if you need more details on Middle Wrecker Truck. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Highway Rescue Vehicle、13tons Wrecker Truck. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Rescue Vehicles And Equipment > Wrecker Truck